抢庄三张

电泳喷涂设备

categories of news

Product Categories

contact us

Jiangsu Wanhe Painting Machinery Co., Ltd.

400 Tel: 400-659-1369

Mobile: 13705101369

Phone: 0515-88261077

Fax: 0515-88301077

Email: jswhtz@163.com

Website: metrouro.com

Address: 266 Xinye Road, Xinyang Economic Zone, Yancheng


technical knowledge

Your current location : Home >> News >> Technical knowledge
  • Talking about the safety production precautions of the coating operation of electrophoretic spraying equipment

    Talking about the safety production precautions and solvent of electrophoretic spraying equipment, most of them are toxic substances. Paint mist, organic solvent vapor and dust are formed during work. Long-term exposure and inhalation of operators can cause chronic poisoning. Harm to health. If they are discharged outdoors, it will cause air pollution. Some photochemically reactive solvents are exposed to sunlight.
    Release time: 2019-11-23 Clicks: 38

  • Two factors affecting the development of spray equipment and their future observations

    Two major factors affecting the development of paint spraying equipment and their future observations With the development of China's economy and technological innovation, the equipment of airless sprayers has become more and more advanced. In recent years, the coating equipment industry has developed, but as we develop, we must constantly review ourselves in order to get better development. influences
    Release time: 2019-05-02 Clicks: 51

  • How to clean the painting equipment spray gun after use

    When cleaning the suction feed spray gun, first remove the paint can, flow the suction tube into the cup, then loosen the air cap 2-3 times, cover the air cap with a folded cloth, and then pull the trigger. This allows the paint in the spray gun to flow back into the paint can. Note: The applied air pressure should be low. When the paint tank is still installed on the gun, do not perform the above operation, otherwise the paint will be removed from the tank.
    Release time: 2019-03-23 Clicks: 28

  • Powder coating equipment is one of the important equipment in the coating production line

    Powder spraying equipment generally uses water curtain spray booth, water spin spray booth, dry spray booth, horizontal spray booth, etc. to spray the workpiece. Generally, the electrostatic spraying method is adopted for spraying the plastic coating line to spray the workpiece. The main equipment of the spray booth is composed of powder spraying room, electrostatic powder spraying equipment, spray gun and powder recovery equipment. The water curtain spray booth in the spray painting line is taken as an example to give an overview.
    Release time: 2019-02-23 Clicks: 38

  • What are the requirements in the use of spraying production line equipment

    What requirements must be observed when spraying equipment is used. First of all, as long as the spraying process uses toxic, irritating and flammable substances, it should be placed in a separate factory building or arranged in a specially separated area in the factory building, and personal protective equipment and fire protection equipment should be specially equipped. Secondly, the passageway of the factory building or workshop must be set up.
    Release time: 2019-01-18 Clicks: 51

  • Problems needing attention when using the coating line

    The coating line is also known as the coating line. It needs to pay attention to 4 aspects during the use. First, the interval time between processes when the coating line is used. The interval time between the various processes of the coating line affects the coating. An important factor in the quality of the installation. If the intervals between the coating line processes are not coordinated, it may cause the workpiece to run excessively.
    Release time: 2019-01-02 Clicks: 42

  • Pre-painting process

    When designing the coating line, firstly obtain the properties (materials, shapes and sizes) of the object to be coated (materials, shapes and sizes), the amount of processing, and the coating technical requirements from the design task (or tender) or directly from the user and the coating material manufacturer Performance, coating material characteristics and other relevant design basic data; then according to the above pre-painting treatment objectives
    Release time: 2018-09-21 Hits: 61

  • Classification of vehicle assembly forms

    The assembly of automotive products (including complete vehicles and assemblies) is one of the most important process links in the manufacturing process of automotive products. It is a process of assembling hundreds or thousands of various components that have passed the inspection according to certain technical requirements into a complete vehicle, engine, transmission and other assemblies. According to the production program of automotive products, product structure characteristics, quality requirements, etc.,
    Release time: 2018-09-10 Hits: 52

  • Composition of powder coating equipment

    The powder spraying equipment is mainly composed of a powder supply barrel, a powder spray gun and a controller. It is a special spray gun for electrostatic spraying of coatings and powder coatings. It is both a paint atomizer and an electrostatic electrode generator. 1. Compressed air; oil-water separation is required, and cold air drying is required. 2, electrostatic spray gun; including electrostatic generator, powder supply bucket. 3. Spray booth (room); with
    Release time: 2018-08-15 Hits: 64

  • What is the application method and procedure of paint spraying?

    During the spraying operation, improper operation of the paint spraying equipment will affect the spraying effect of the product. Good spraying effects are manifested as follows: 1. Average coating distribution 2. The coating must not be too thick or too thin. Points to note when spraying: Nozzle outlet
    Release time: 2018-08-15 Clicks: 45

Total 22 10 Articles per page Pages: 1/3
2 3 下一页 尾页 1 2 3NextLast

Contact: Mr. Zhang

Phone: 137-0510-1369

Website: metrouro.com

Address: No.266 Xinye Road, Xinyang Economic Zone, Yancheng City, Jiangsu Province

油漆喷涂设备

上海 浙江 北京 湖北 四川 河南 湖南 江西 河北 Hot Products | Main Areas: Jiangsu Shanghai Zhejiang Beijing Hubei Sichuan Henan Hunan Jiangxi Hebei
online service
share it One-click sharing
a