Nowadays, the powder spraying equipment production line contains almost no VOC and has a high recycling rate. In addition, the powder electrostatic spraying effect is significantly better than the spraying process in terms of mechanical strength, adhesion, corrosion resistance, aging resistance, etc., and the cost is the same. Below, the current application of powder electrostatic coating technology is still growing. And it is mainly used in assembly line production methods. Reasonable spraying equipment is the key to improve production efficiency and ensure product quality. So what are its benefits?
1. Coating film superiority: The relative molecular mass of the resin in the powder coating equipment production line is greater than that of solvent-based coating resins. This makes the coating film's physical and mechanical properties and resistance to chemical media better than solvent-based coatings, specifically its acid resistance. , Alkali and salt have better corrosiveness and high adhesion.
2. Cost saving: more than 95% of the sprayed powder can be recycled; the powder spraying equipment production line has no sagging and is easy to clean; no solvent, no adjustment of viscosity, no leveling time; the waste rate can be controlled in a low state, after spraying If the surface coating of the workpiece before entering the curing furnace is unsatisfactory, the powder can be blown off and re-sprayed.
3. Convenience of powder spraying equipment production line: powder coatings are stable in storage at normal temperature, do not need to adjust viscosity with seasons like solvent-based coatings, and do not need to be left for a period of time after spraying to allow the solvent to evaporate before drying . It only needs to be heated, baked, melted and solidified to form a flat and bright coating film for decoration and anti-corrosion purposes.
4. Convenient application: The powder spraying equipment production line can provide a variety of colors; the regularity of powder spraying performance and the coating coating make the operator need not have a high level of technology; it can be easily equipped with an automatic wheel lifter. Realize automatic production, can finish coating in one time, shorten production time.
5. Powder spraying equipment production line can achieve the desired effect! With the continuous development of the scientific and technological era, its equipment technology will become more and more mature, and it can be applied to more aspects and deeper levels in the future, using personnel For the use of such equipment, we must thoroughly understand it, so that we can better use it effectively and give play to the value of the equipment itself. In the process of using the spraying machine, it is necessary to ensure a stable amount of current so that the spraying effect can achieve the desired effect.